Services Reconditioning of separators, decanters and centrifuges

Fit for new tasks

In the process of the service overhaul our specialists check the essential machine parts for functionality and wear. During this process all bearings and seals are being replaced by original parts.

Service overhaul separator

Austausch der Dichtungen und Lager

Seals and bearing replacements

All centrifuge seals and bearings are replaced only with genuine spare parts.

verschleißpruefung

Wear inspections

We check the most important machine components for wear and replace defective or worn machine componnents with genuine spare parts.

Wechsel der Schmierstoffe

Lubricant replacements

The old lubricants are drained off completely and replaced with new oils and fats.

Motorenüberprüfung

Motor checks

Extensive checks are carried out on our centrifuges' motors.

SPS-Steueranlage

PLC System

We will on request also supply new PLC systems with our centrifuges. These controls are safe and easy to use.

Probelauf

Test run

We carry out extensive test runs, which include vibration measurements and function checks, before shipping. The results will be extensively documented.

Inbetriebnahme

Commissioning

On request, our experts will also integrate the rebuilt centrifuges into your production flows.

Service overhaul decanter

Austausch der Dichtungen und Lager

Seals and bearing replacements

All seals and bearings are replaced only with genuine spare parts.

verschleißpruefung

Wear inspections

We check the most important machine components for wear, replace defective or worn machine components with genuine spare parts, or repair those.

Wechsel der Schmierstoffe

Lubricant replacements

The old lubricants are drained off completely and replaced with new oils and fats.

Motorenüberprüfung

Motor checks

Extensive checks and full service-rebuilding are carried out on the motors and gearboxes.

SPS-Steueranlage

PLC System

We will on request also supply new PLC systems with our decanters. These controls are safe and easy to use.

Probelauf

Test run

Extensive test runs, including vibration measurements and function checks, are carried out on our rebuilt decanters before they're shipped.

Inbetriebnahme

Commissioning

On request, our experts will also integrate the rebuilt decanter into your production flows.

A service overhaul consists of seven steps

  1. Exchange of bearings and seals
    Seals and bearings are beeing replaced by original parts.
  2. Wear inspections
    All machine parts are checked for wear. Damaged or worn parts are being replaced with original parts.
  3. Exchange of lubricant
    Old lubricants are released and exchanged with new fats or oil.
  4. Engine test/overhaul
    The engine of the centrifuges are beeeing checked up comprehensively and undergone a complete overhaul.
  5. PLC System
    We will on request also supply new PLC systems with our centrifuges. These controls are safe and easy to use.
  6. Test run
    Before delivery a comprehensive test-run, including a vibration test and a function test is being carried out.
  7. Start-up
    On request, our experts will also integrate the rebuilt centrifuges into your production flows.

Contact us!

What is the sum of 2 and 9?